First cycle
degree courses
Second cycle
degree courses
Single cycle
degree courses
School of Engineering
Course unit
INL1001831, A.A. 2016/17

Information concerning the students who enrolled in A.Y. 2014/15

Information on the course unit
Degree course First cycle degree in
IN0507, Degree course structure A.Y. 2011/12, A.Y. 2016/17
bring this page
with you
Number of ECTS credits allocated 9.0
Type of assessment Mark
Course unit English denomination INDUSTRIAL ELECTRONICS
Department of reference Department of Information Engineering
E-Learning website
Mandatory attendance No
Language of instruction Italian
Single Course unit The Course unit can be attended under the option Single Course unit attendance
Optional Course unit The Course unit can be chosen as Optional Course unit

Teacher in charge PAOLO TENTI ING-INF/01

ECTS: details
Type Scientific-Disciplinary Sector Credits allocated
Core courses ING-INF/01 Electronics 9.0

Course unit organization
Period First semester
Year 3rd Year
Teaching method frontal

Type of hours Credits Teaching
Hours of
Individual study
Lecture 9.0 72 153.0 No turn

Start of activities 26/09/2016
End of activities 20/01/2017
Show course schedule 2019/20 Reg.2011 course timetable

Examination board
Board From To Members of the board
8 A.A. 2019/2020 01/10/2019 15/03/2021 BUSO SIMONE (Presidente)
ROSSETTO LEOPOLDO (Membro Effettivo)
7 A.A. 2018/2019 01/10/2018 15/03/2020 BUSO SIMONE (Presidente)
SPIAZZI GIORGIO (Membro Effettivo)
TENTI PAOLO (Supplente)

Prerequisites: The course makes use of some basic concepts and results of circuit theory and signal analysis, in particular the harmonic spectrum of stationary waveforms and dynamic analysis of linear systems by Laplace transforms. Technologies and operating properties of semiconductor components are also referred to, as well as basic concepts of automatic control.
Target skills and knowledge: The course discusses the basic configurations of electronic power supplies, both AC and DC, and provides the fundamental competences needed to approach the analysis and design of switching converters, with- or without insulation, for a wide range of power levels and application domains.
The properties and application characteristics of the main power electronic devices are also analyzed, together with their driving circuits and operational limits (electrical, thermal, electromagnetic), with the aim to offer the student an overview of the practical application problems of power electronic components and systems.
The operational characteristics of dc/dc converters, both open-loop and closed-loop, are experimentally verified by a set of laboratory tests made on ad-hoc circuit boards.
Examination methods: Written examination: preliminary design of a dc/dc converter; laboratory test report,
Oral examination: discussion on the course matter.
Laboratory examination: setup and test of an experimental converter circuit.
Assessment criteria: The evaluation of the student preparation will be based on the discussion of the theoretical operation of power converters and their design criteria, and on laboratory measurements on converter prototypes.
Course unit contents: In the beginning, the course gives an overview of the many fields of application of switching power supplies, and their requirements in terms of electrical performances, efficiency, reliability, and environmental compatibility.
Follows a description of the most popular power electronic devices (diodes, Power Mosfets, IGBTs), with their functional characteristics, limits and application domains.
The main non-insulated dc/dc converter topologies (buck, boost, buck-boost) are then presented, their performances in the continuous and discontinuous operation mode are considered, the main control techniques based on voltage and current feedback are analyzed, and design criteria are discussed as well.
After an introduction of the high-frequency transformers structure and operation, the main insulated dc/dc converter topologies are then presented (forward, dual-forward, push-pull, flyback), their properties analyzed, and design criteria discussed.
The next subject relates to single-phase inverters (half-bridge and full-bridge), their operation and control methods.
Finally, after an analysis of the International standards limiting the harmonic injection in the public electric grid, the main topologies of power factor correctors (boost- and flyback-PFC) are presented.
Planned learning activities and teaching methods: Classes:
1.Introduction to the course
2.Power electronic devices (generalities about power devices: SOA, snubber, thermal aspects; diodes; power Mosfets; IGBTs; IGCTs)
3.Basic topologies of non-insulated dc/dc converters (introduction to dc/dc converters; buck converter in continuous conduction mode, CCM, and discontinuous conduction mode, DCM; boost converter; buck-boost converter;
4.Insulated dc/dc converter topologies (high-frequency transformers; forward converter; dual-forward converter; push-pull converter; flyback converter)
5.Bidirectional dc/dc converters
6.Control of dc/dc converters (pulse width modulation, PWM; feedforward voltage control; feedback voltage control; feedback voltage control with current limit; average current control; peak current control)
7.Ac/dc converters (diode rectifiers with capacitive filters; harmonic standards and passive filtering; power factor correctors, PFC; boost PFC; flyback PFC
8.Dc/ac converters (single-phase voltage-fed inverters; half-bridge inverters; full-bridge inverters; PWM control of inverter output voltage)

Exercises: preliminary design of various types of converters

Laboratory: experimantal verification of the operating characteristics of a buck converter (open-loop stationary and dynamic analysis; closed-loop voltage control and current control)
Additional notes about suggested reading: The students can download from the moodle webpage of the course: the course minutes, copy of the powerpoint files used by the teacher, several exercises, and some design examples
Textbooks (and optional supplementary readings)
  • Ned Mohan, Tore M. Undeland, William P. Robbins, Elettronica di potenza : convertitori e applicazioni. --: Hoepli, 2005. ISBN 88-203-3428-3 Cerca nel catalogo
  • Ned Mohan, Tore M. Undeland, William P. Robbins, Power Electronics: Converters, Applications, and Design. --: Wiley, 2003. ISBN 0-471-22693-9 Cerca nel catalogo
  • Robert W. Erickson, Dragan Maksimovic, Fundamentals of power electronics. --: Kluwer, 2001. ISBN 0792372700 Cerca nel catalogo