First cycle
degree courses
Second cycle
degree courses
Single cycle
degree courses
School of Engineering
ELECTRONIC ENGINEERING
Course unit
POWER ELECTRONICS 1
INP3054110, A.A. 2014/15

Information concerning the students who enrolled in A.Y. 2013/14

Information on the course unit
Degree course Second cycle degree in
ELECTRONIC ENGINEERING
IN0520, Degree course structure A.Y. 2008/09, A.Y. 2014/15
N0
bring this page
with you
Number of ECTS credits allocated 9.0
Type of assessment Mark
Course unit English denomination POWER ELECTRONICS 1
Department of reference Department of Information Engineering
Mandatory attendance No
Language of instruction English
Branch PADOVA
Single Course unit The Course unit can be attended under the option Single Course unit attendance
Optional Course unit The Course unit can be chosen as Optional Course unit

Lecturers
Teacher in charge GIORGIO SPIAZZI ING-INF/01

Mutuated
Course unit code Course unit name Teacher in charge Degree course code
INP3054110 POWER ELECTRONICS 1 GIORGIO SPIAZZI IN0527

ECTS: details
Type Scientific-Disciplinary Sector Credits allocated
Core courses ING-INF/01 Electronics 9.0

Course unit organization
Period First semester
Year 2nd Year
Teaching method frontal

Type of hours Credits Teaching
hours
Hours of
Individual study
Shifts
Lecture 9.0 72 153.0 No turn

Calendar
Start of activities 26/09/2016
End of activities 24/01/2015
Show course schedule 2019/20 Reg.2019 course timetable

Examination board
Examination board not defined

Syllabus
Prerequisites: In addition to a basic knowledge of mathematics and physics, the course makes use of concepts developed in the courses of Circuit Theory (properties of electrical networks and fundamental theorems of network theory), Electronics (electronic devices, operational amplifiers), and Signals & Systems (feedback, stability, frequency response, Bode plots).
Target skills and knowledge: The main goal of this course is to make the students familiar with the analysis of switching converters, by providing them with the theoretical and pratical tools necessary to design and realize high frequency conversion systems, with reference to dc-dc converters.
Examination methods: The final examination is divided into two parts:
1 - written test
2 - oral test
The reports regarding the laboratory activity must be presented before the examination.
Assessment criteria: The evaluation criteria are based on the acquired ability in the analysis and design of switching electronic systems.
Course unit contents: - General concepts on Power Electronics
- static and dynamic characterization of electronic devices employed as switches: diodes, MOSFET, IGBT;
- basic dc-dc converter topologies: steady-state analysis (Continuous Conduction Mode - CCM and Discontinuous Conduction Mode - DCM);
- isolated converters: forward (reset R-C-D, active clamp and auxiliary winding), push-pull, half-bridge, full-bridge, flyback;
- average models in CCM and DCM and their linearization around a given operating point;
- direct duty-cycle control: design of PI and PID controllers
- double loop current controls: peak current mode, average current mode;
- analysis of high-frequency transformers: skin and proximity effects, approximated derivation of the low-frequency transformer leakage inductance, Dowell curves and high-frequency winding losses;
- snubber for switch overvoltage limitation at turn off (clamping circuits);
- input filters: design criteria;
- laboratory activity: static and dynamic measurements of a boost dc-dc converter;
- description of MATLAB/Simulink and PLECS software and their use in the simulation of switching power supplies.
Planned learning activities and teaching methods: The course is based essentially on lectures with the use of a standard blackboard and slides for specific arguments.
A laboratory activity is included in which students have the possibility to test a real dc/dc converter and to design a controller.
Additional notes about suggested reading: Didactic material will be made available in the course's web page (Moodle)
Textbooks (and optional supplementary readings)
  • R. W. Erickson, D. Maksimovic, Fundamentals of Power Electronics - Second Edition. --: Kluwer Academic Publishers, 2001. ISBN 0-7923-7270-0 - Main reference book Cerca nel catalogo
  • N. Mohan, T. Undeland, W. Robbins, Power Electronics: Converters, Applications, and Design, Second Edition. --: Wiley & Sons Inc., 1995. ISBN 0-471-58408-8 - Auxiliary reference book Cerca nel catalogo
  • J. G. Kassakian, M. F. Schlecht, G. C. Verghese, Principle of Power Electronics. --: Addison Wesley, 1991. ISBN 0-201-09689-7 - Auxiliary reference book Cerca nel catalogo